Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 647
53-1001357-01
About User Privileges
C
High Integrity Fabric For Fabric OS devices,
allows you to set Fabric
Binding and Insistent
Domain IDs.
For M-EOS devices, allows
you to activate the High
Integrity Fabric, which
activates Fabric Binding,
Switch Binding, Insistent
Domain ID, Rerouting
Delay, and Domain
RSCNs.
Disables the High
Integrity Fabric command
from the Configure menu.
Enables the High Integrity
Fabric command from the
Configure menu.
Disables all commands
and functions on the
dialog box except the
Cancel and Help.
Enables the High Integrity
Fabric command from the
Configure menu.
Disables all commands
and functions on the
dialog box.
Host Management Allows you to configure a
host.
Disables the Element
Manager command on
the right-click menu and
the Element Manager >
HCM command on the
Configure menu.
Disables the Element
Manager command on
the right-click menu and
the Element Manager >
HCM command on the
Configure menu.
Enables the Element
Manager command on
the right-click menu and
the Element Manager >
HCM command on the
Configure menu.
License Update Allows you to update your
license.
Allows you to control
access to the License
dialog box from the Help
menu.
Disables the License
command on the Help
menu.
Enables the License
command on the Help
menu; however, disables
the Update and OK
buttons.
Enables the License
command on the Help
menu and enables you to
change the license key.
Logical Switch
Configuration
Allows you to create a
new logical switch, assign
and remove ports from a
logical switch, delete a
logical switch, configure a
logical fabric, and change
the fabric ID of a logical
switch.
You must be assigned to
the 'All Fabrics' resource
group to access Logical
Switch Configuration
feature.
Disables the Logical
Switches command from
the Configure menu.
Enables the Logical
Switches command from
the Configure menu.
Disables all functions
from the dialog box
except view.
Also requires access to All
Resources resource
group to access the
Logical Switches dialog
box.
Enables the Logical
Switches command from
the Configure menu.
Enables all commands
and functions on the
dialog box.
Also requires access to All
Resources resource
group to access the
Logical Switches dialog
box.
TABLE 33 Privileges and Application Behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write