Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 651
53-1001357-01
About User Privileges
C
Security Allows you to enable and
configure SANtegrity
features.
Disables the Security
command from the
Configure > Switch >
Replicate menu.
Disables the Security Log
command on the Monitor
> Logs menu.
Disables the Security
Misc command from the
SAN > Options menu.
Disables the Security
command from the
Configure > Switch >
Replicate menu.
Enables the Security Log
command on the Monitor
> Logs menu.
Enables the Security Misc
command from the SAN >
Options menu; however,
disables the functions.
Enables the Security
command from the
Configure > Switch >
Replicate menu.
Enables the Security Log
command on the Monitor
> Logs menu.
Enables the Security Misc
command from the SAN >
Options menu.
Enables all functions in
the dialog boxes.
Servers Allows you to identify all
the HBAs that are in the
same server.
Disables the Servers
command from the
Discover menu.
Disables the Server
right-click command on
HBAs.
Enables Servers
command from the
Discover menu and
right-click menu; however,
disables the Create,
Delete, and OK buttons.
Enables Servers
command from the
Discover menu and
right-click menu.
Enables all functions in
the Servers dialog box.
Setup Tools Allows you to define and
place commands on
product icons and in the
Tools menu.
Disables the Setup Tools
command on the Tools
menu. Any existing Tools
and/or right-click
commands already
defined or defined by
others are available for
use; however, you cannot
configure new items.
If this privilege is removed
and the Event
Management privilege is
assigned then this
message appears:
<title: <Product>
Message>
<Warning>Removing the
Log Management
privilege does not remove
users' ability for Setup
Tools in Event
Management. You might
also want to consider
removing the Event
Management privilege as
well.
Enables the Setup Tools
command on the Tools
menu; however, disables
the OK button.
Enables the Setup Tools
command on the Tools
menu.
Enables all functions in
the Setup Tools dialog
box.
Software Configuration
Parameters
Allows you to configure
some of the properties of
the client and server of
the management
application.
Disables the Software
Configuration Parameters
folder and subpages in
the Options dialog box.
The configuration cannot
be viewed.
Enables the Software
Configuration Parameters
folder and subpages in
the Options dialog box;
however, disables the OK
and Apply buttons when
any of the subpages are
selected.
Enables the Software
Configuration Parameters
folder and subpages in
the Options dialog box.
Enables all functions
when any of those
subpages are selected.
TABLE 33 Privileges and Application Behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write