Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

662 DCFM Enterprise User Manual
53-1001357-01
Client_view
D
Client_view
TABLE 44 CARD
Field Definition Format Size
ID * int
CORE_SWITCH_ID * Core switch DB ID. int
SLOT_NUMBER The number of the physical slot in the chassis where
the blade is plugged in. For fixed blades, SlotNumber is
zero.
smallint
TYPE ID of the blade to identify the type. smallint
EQUIPEMNT_TYPE The type of the blade. It is either SW BLADE or CP
BLADE.
varchar 16
STATE State of the blade, such as ENABLED or DISABLED. varchar 32
POWER_STATE State of power supply to the blade. varchar 16
ATTN_STATE varchar 32
SERIAL_NUMBER Factory serial number of the blade. varchar 32
PART_NUMBER The part number assigned by the organization
responsible for producing or manufacturing the blade.
varchar 32
TRUNKING_SUPPORTED 1 = trunking is supported on this blade. smallint
FICON_DISABLED 1 = FICON is disabled on this blade. smallint
IP_ADDRESS IP address of first Ethernet management port for a
given slot with intelligent blade.
char 64
SUBNET_MASK Mask of first Ethernet man.agement port for a given
slot with intelligent blade.
varchar 64
DEFAULT_GATEWAY Gateway IP address Ethernet management for a given
slot with intelligent blade.
varchar 64
PRIMARY_FW_VERSION Primary firmware version of applications on this blade.
Applicable only for AP_BLADE.
varchar 48
SECONDARY_FW_VERSION Secondary firmware version applications on this blade.
Applicable only for AP_BLADE.
varchar 48
TABLE 45 CORE_SWITCH_CAPABILITY
Field Definition Format Size
CORE_SWITCH_ID * DB ID. int
CAPABILITY_ * Name of the capability detected on the core switch. varchar 256
ENABLED 1 = the capability is enabled on the core switch. int
TABLE 46 USER_
Field Definition Format Size
NAME * User name. varchar 128
DESCRIPTION User description. varchar 512