Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 41
53-1001357-01
Discovering fabrics
2
6. Click the SNMP tab (Figure 10).
FIGURE 10 Address Properties Dialog Box (SNMP - v1 tab)
7. Enter the target port in the Target Port field.
8. Enter the duration (in seconds) after which the application times out in the Time-out (sec) field.
9. Enter the number of times to retry the process in the Retries field.
10. Select the SNMP version from the SNMP Version list.
• If you selected v1, continue with step 11.
• If you select v3, the SNMP tab displays the v3 required parameters. Go to step 15.
To discover a Virtual Fabric device, you must configure SNMP v3 and your SNMP v3 user
account must be defined as a Fabric OS switch user.
11. Specify the Read option by selecting Default ‘public’ or Custom.
12. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
13. Specify the Write option by selecting Default ‘private’ or Custom.
14. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
Go to step 22.
15. If you are configuring a 256-port director, select the Configure for <256-Port_Director_Name>
check box.
• If you selected Configure for <256-Port_Director_Name>, go to step 19.
• If you did not select Configure for <256-Port_Director_Name>, continue with step 16.