Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

42 DCFM Enterprise User Manual
53-1001357-01
Discovering fabrics
2
FIGURE 11 Address Properties Dialog Box (SNMP Tab - v3)
16. Enter a user name in the User Name field.
17. Enter a context name In the Context Name field.
18. Select the authorization protocol in the Auth Protocol field.
19. Enter the authorization password in the Auth Password field.
• If you selected Configure for <256-Port_Director_Name>, go to step 22.
• If you did not select Configure for <256-Port_Director_Name>, continue with step 20.
20. Select the privacy protocol in the Priv Protocol field.
21. Enter the privacy password in the Priv Password field.
22. Click OK on the Address Properties dialog box.
If the seed switch is partitioned, the Undiscovered Seed Switches dialog box displays.
a. Select the Select check box for each undiscovered seed switch to discover their fabrics.
b. Click OK on the Undiscovered Seed Switches dialog box.
23. Repeat step 2 through step 22 for each fabric you want to discover.
NOTE
Professional Plus edition can only discover 4 fabrics.
24. Click OK on the Discover Setup dialog box.