Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

78 DCFM Professional User Manual
53-1001355-01
Restoring data
3
Restoring data
1. (Windows) Open the Server Management Console from the Start menu on the Management
application server.
OR
(UNIX) Open <Install_Home>/bin from the Management application server and type
./smc.sh
at the command line.
2. Click the Services tab.
The tab lists the Management application services.
3. Click Stop Services to stop all of the services.
4. Click the Restore tab.
5. Browse to the backup location.
Browse to the location specified in the Output Directory field on the Options dialog box -
Backup pane.
6. Click Restore.
Upon completion, a window displays the status of the restore operation.
7. Click the Services tab.
The tab lists the Management application services.
8. Click Start Services to start all of the services.
9. Click OK to close the dialog box.
Restoring data to a new server
If your Management application server fails and you must recover information to a new server,
complete the following steps.
1. Restore the data (Refer to “Restoring data” on page 78 for complete instructions).
2. Configure an explicit server IP address (Refer to “Configuring an explicit server IP address” on
page 103 for complete instructions).