Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 85
53-1001355-01
Flyovers
3
6. Select the Connection tab (Figure 31) and complete the following steps to select the
information you want to display on flyover.
FIGURE 31 Options Dialog Box (Flyovers option, Connection tab)
a. Select the protocol from the Protocol list.
The default protocol is Fibre Channel. Depending on which protocol you select, some
properties may not be available for all protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
Fibre Channel (default)
• Name (port)
• Address
• Node WWN
• Port WWN
• Port#
• Attached Port#
• OS Device Name
• Symbolic Name
• IP Address
• Max Frame Size (bytes)
• Active FC4 Types
• Supported FC4 Types
• Speed Configured (Gbps)
• Speed Supported (Gbps)
• Class of Service
• Operational State
• Blocked Configuration
• FC Address
• Fabric
• Port State
• Port Type
• Port Blocked Reason
• Name
• Device Type