Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 107
53-1001355-01
Memory allocation
3
4. Enter the memory allocation (MB) for the server in the Server Memory Allocation field.
If your server has a minimum of 2 Gb RAM, change the default server memory value to
1024 MB. If your server is running less than 2 Gb RAM, do not change the default (512 MB).
Do not exceed the following server memory values:
• For Windows systems, the maximum server memory allocation is 1.4 GB.
• For UNIX systems, the maximum server memory allocation is 2 GB.
If you enter an invalid value, an error message displays with the minimum value (768 MB)
allowed. Click OK and edit the value again.
5. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after an application restart.
6. Click OK on the “changes take effect after application restart” message.
Configuring asset polling
To configure asset polling, complete the following steps.
1. Select SAN > Options.
The Options dialog box displays.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
client.
3. Enter how often (default is 60 seconds) you want to check for state changes in the Check for
state change every field.
You cannot enter a vaule lower than the default minimum value.
4. Enter how often (default is 120 seconds) you want to check for state changes in the If no state
change, Poll switch every field.
5. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after an application restart.
6. Click OK on the “changes take effect after application restart” message.