Manualshelf

Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
131132133134135136137138139140
108 DCFM Professional User Manual
53-1001355-01
Server port
3
Server port
You can configure the server port settings so that you can assign a web server port number and set
the server port to be SSL-enabled.
Configuring the server port
To configure server settings, complete the following steps.
1. Select SAN > Options.
The Options dialog box displays (Figure 40).
FIGURE 40 Options Dialog Box (Server Port option)
2. Select Server Port in the Category list.
3. Select the Enable SSL check box to enable this function for the server port.
4. Enter a port number in the Web Server Port # field.
NOTE
Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server.
5. Enter a port number in the Starting Port # field.
The server requires 13 consecutive free ports beginning with the starting port number.