Manualshelf

Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
131132133134135136137138139140
DCFM Professional User Manual 109
53-1001355-01
Support mode
3
6. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after application restart.
7. Click OK on the “changes take effect after application restart” message.
Support mode
You can configure support settings to allow enhanced diagnostics.
Configuring support mode settings
To configure support mode settings, complete the following steps.
1. Select SAN > Options.
The Options dialog box displays (Figure 41).
FIGURE 41 Options Dialog Box (Support Mode option)
2. Select Support Mode in the Category list to enable or disable support modes.
NOTE
Only use this option when directed to by customer support.
3. Select the Log client support data - Log Level list, and select the type of log data you want to
configure.
Log level options include: All, Fatal, Error, Warn, Info, Debug, Trace, and Off. Default is Info.
The log level options return to the default value (Info) when the client or server is restarted.