Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 133
53-1001355-01
Device properties
5
Device properties
You can customize the device Properties dialog boxes to display only the data you need by adding,
editing, and deleting property labels. You can also edit property fields to change information.
Viewing properties
To view the properties for a device or fabric, complete the following step.
Right-click any product icon and select Properties.
The Properties dialog box displays, with information related to the selected device (such as,
switches, directors, HBAs, trunks, tunnels, and nodes).
Depending on the device type, any of the following port tabs may display:
• FC Ports
• GigE Ports
• IP Ports
• iSCSI Ports
• POM
• Remote Ports
• SFP
• Virtual Sessions Ports
• Virtual FCoE Ports
Depending on the device type, some of the properties listed in the following table may not be
available for all products.
TABLE 19 Device property fields
Field Description
Back to Edge Routing Support Whether back to edge routing is supported.
Bandwidth The bandwidth of the FCIP tunnel.
Capability The node capability.
Compression Whether compression is On or Off for the FCIP tunnel.
Connected Virtual FCoE Port The fabric name, switch name, and virtual FCoE port number of the
connected virtual FCoE port.
Contact The primary contact at the customer site.
Contributors The device contributors.
Device Type Whether the device is an initiator or target.
Description A description of the customer site.
Destination IP Address The IP address of the of the FCIP tunnel destination device.
Discovery Status The name of the device that is discovered.
Domain ID The device’s domain ID, which is the top-level addressing hierarchy of
the domain.
Fabric Name The name specified through the device Element Manager.