Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 169
53-1001355-01
Viewing the upload failure data capture repository
5
3. Click Change FTP Host.
The Change FTP Server dialog box displays.
FIGURE 60 Change FTP Server dialog box
4. Choose one of the following options:
• Select the Use <Management_Application> option to use the Management application
FTP server.
• Select the Custom option and complete the following steps to configure a FTP server for
the selected device.
a. Enter the server’s IP address in the Host IP field.
c. Enter a user name for the server in the User Name field.
d. Enter a password for the server in the Password field.
e. Enter the path to where the trace dump data is saved in the Directory Path field.
5. Click Test to test the server credentials.
6. Click OK on the Change FTP Host dialog box.
7. Click OK on the Upload Failure Data Capture dialog box.
8. Click OK on the confirmation message, if necessary.
Viewing the upload failure data capture repository
NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
1. Select Monitor > Technical Support > View Repository.
The Repository dialog box displays.
2. Select the trace dump file you want to view from the Available Support and Upload Failure Data
Capture Files table.
3. Click View.
The Upload Failure Data Capture repository displays.