Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

226 DCFM Professional User Manual
53-1001355-01
Host performance management
9
Host performance management
Real-time performance enables you to collect data from managed HBA ports. You can use real-time
performance to configure the following options:
• Select the polling rate from 10 seconds up to 1 minute.
• Select up to 32 ports total from a maximum of 10 devices for graphing performance.
• Choose to display the same Y-axis range for both the Tx MB/Sec and Rx MB/Sec measure
types for easier comparison of graphs.
Table 26 lists the counters that are supported for the FC ports and for the HBA ports.
Instructions for generating real-time performance data are detailed in Generating a real-time
performance graph.
TABLE 26
FC port measures HBA port measures
Tx % utilization Tx % utilization
Rx % utilization Rx % utilization
Tx MBps Tx MBps
Rx MBps Rx MBps
CRC errors CRC errors
Signal losses Signal losses
Sync losses Sync losses
Link failures Link failures
Sequence errors Primitive sequence protocol errors
Invalid transmissions
Rx link resets
Tx link resets
NOS count
Error frames
Dropped frames
Undersized frames
Oversized frames
Bad EOF frames
Invalid ordered sets
Non-frame coding error