Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 249

53-1001355-01

Configuring FCIP tunnel advanced settings

Compression, FCIP fast write and tape pipelining, IPSec and IKE policies, and FICON emulation

features are configured as advanced settings.

1. Click Advanced Settings on the Configure Tunnel dialog box.

The Advanced Settings dialog box is displayed. This dialog box has a Transmission tab, Security

tab, and FICON Emulation tab.

2. Click OK to close Advanced settings when you have configured the features that you want to

implement.

3. Click Next to continue.

A summary of the configuration parameters is shown. A rotating arrow under Status indicates a

configuration step is in progress. A blue check mark indicates successful completion of all

steps for that Configuration Item. A red stop sign indicates a failed step. If the configuration is

successful, all configuration items have blue check marks.

The tunnel configuration begins. You can see a progress bar and the configuration results in

the wizard Report panel

4. Click Finish to close the FCIP Tunnel Configuration wizard.

Compression, OSTP, and Tperf

Compression, OSTP (fast write and tape pipelining) and Tperf test mode are enabled from the

Transmissions tab (Figure 72).

FIGURE 72 Advanced Settings Transmission tab