Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

308 DCFM Professional User Manual
53-1001355-01
Disabling 802.1x
11
Disabling 802.1x
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a port or LAG, and click Edit.
3. Click the 802.1x tab on the Edit Port dialog box.
The 802.1x dialog box displays.
4. Clear the Enable 802.1x check box to disable 802.1x authentication.
5. Click OK.
The CEE Confirmation and Status dialog box displays.
6. Review the changes carefully before you accept them.
7. Click Start to apply the changes, or click Close to abort the operation.
Setting 802.1x parameters for a port
The 802.1x parameters can be configured whether the feature is enabled on the switch or a port.
The default parameters are initially populated when 802.1x is enabled on a port, but you can
change the default values as required.
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a port, and click Edit.
3. Click the 802.1x tab on the Edit Port dialog box.
The Enable 802.1x dialog box displays.