Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 7
53-1001355-01
Menu bar
1
Port Fencing. (Professional Plus and Enterprise Edition
Only) Select to configure port fencing to protect your
SAN from repeated operational or security problems
experienced by ports.
Port Auto Disable. Select to configure port auto disable
flag on individual FC_ports or all ports on a selected
device, as well as unblock currently blocked ports.
FICON. (Enterprise Edition Only) Select to configure
FICON.
Configure Fabric. Select to configure cascaded FICON
from the selected fabric.
Merge Fabrics. Select to merge the selected fabrics.
Allow/Prohibit Matrix. (Enterprise Edition Only) Select
to allow FICON users to configure an Allow/Prohibit
Matrix table. You can select any matrix tables and
compare them either vertically or horizontally.
Port Groups. (Professional Plus and Enterprise Edition
Only) Select to configure a group of ports from one or
more switches within the same fabric.
FC Troubleshooting. Select to troubleshoot your SAN.
Trace Route. Select to view the route information
between two device ports.
Device Connectivity. Select to view the connectivity
information for two devices.
Fabric Device Sharing. (Professional Plus and
Enterprise Edition Only) Select to determine if the
selected fabrics are configured to share devices.
IP Troubleshooting. Select to troubleshoot your IP.
Ping. Select to perform a zoning check between the
selected device port WWNs.
Trace Route. (Professional Plus and Enterprise Edition
Only) Select to view the route information from a
source port on the local device to a destination port on
another device.
Performance. (Professional Plus and Enterprise Edition
Only) Select to view IP performance between two
devices.
List Zone Members. (Professional Plus and Enterprise
Edition Only) Select to display all members in a zone.
Monitor Menu.
Performance. Select to monitor SAN devices.
View Utilization. (Professional Plus and Enterprise
Edition Only) Select to display connection utilization.
TABLE 2 Menu Bar
Menu Command Command Options