Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 371

53-1001355-01

Restoring a master key from a smart card set

A card reader must be attached to the SAN Management application PC to complete this

procedure.

Use the following procedure to restore the master key from a set of smart cards.

1. Select Configure > Encryption from the menu bar.

The Encryption Center dialog box displays.

2. Select an encryption group from the tree, and click Properties.

3. Select the Security tab.

4. Select Restore Master Key as the Master Key Action.

The Restore Master Key for Encryption Group dialog box displays.

FIGURE 149 Select a Master Key to Restore (from a recovery set of smart cards) dialog box

5. Choose the active or alternate master key for restoration, as appropriate. Refer to “Active

master key” on page 363 and “Alternate master key” on page 364 if you need more

information on active and alternate master keys.

6. Select A Recovery Set of Smart Cards as the Restore From location.

7. Insert the recovery card containing a share of the master key that was backed up earlier, and

wait for the card serial number to appear.

8. Enter the password that was used to create the card. After five unsuccessful attempts to enter

the correct password, the card becomes locked and unusable.

9. Click Restore.

The dialog box prompts you to insert the next card, if needed.