Manualshelf

Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
431432433434435436437438439440
412 DCFM Professional User Manual
53-1001355-01
Removing a zone from a zone configuration
13
6. Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Removing a zone from a zone configuration
Use the following procedure to remove a zone from a zone configuration. Note that the zone is not
deleted; it is only removed from the zone configuration.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Click the plus sign (+) by the appropriate zone configuration in the Zone Configs list to expand
the listing and show the zone configuration members.
5. Perform one of the following actions:
• Right-click the name of the zone you want to remove in the Zone Configs list and select
Remove.
• To remove multiple zones, select the zones to be removed from the zone configuration,
and click the left arrow between the Zones list and the Zone Configs list.
When successful, the zone is removed from the Zone Configs list.
6. Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Renaming a zone
Use this procedure to assign a new name to a zone.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Right-click the name of the zone you want to change in the Zones list and select Rename.
5. Type the new name for the zone.
For zone name requirements and limitations, refer to “Zoning naming conventions” on
page 378.