Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

40 DCFM Professional User Manual
53-1001355-01
Discovering fabrics
2
2. Click Add Fabric to specify the IP addresses of the devices you want to discover.
The Address Properties dialog box displays.
FIGURE 8 Address Properties Dialog Box (IP Address tab)
3. Enter a name for the fabric in the Fabric Name field.
4. Enter an IP address for a device in the IP Address field.
For seed switch requirements, refer to “Seed switch requirements” on page 54.
NOTE
The Backbone Chassis cannot be used as a seed switch.
NOTE
Professional and Professional Plus editions cannot manage the Backbone Chassis.
Professional edition cannot manage pure M-EOS fabrics.
NOTE
Professional edition can discover only 1 fabric.
5. If a user ID and password are required, enter them in the User ID and Password fields.
6. Click the SNMP tab (Figure 9).
FIGURE 9 Address Properties Dialog Box (SNMP - v1 tab)
7. Enter the target port in the Target Por t field.