Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

DCFM Professional User Manual 41
53-1001355-01
Discovering fabrics
2
8. Enter the duration (in seconds) after which the application times out in the Time-out (sec) field.
9. Enter the number of times to retry the process in the Retries field.
10. Select the SNMP version from the SNMP Version list.
• If you selected v1, continue with step 11.
• If you select v3, the SNMP tab displays the v3 required parameters. Go to step 15.
11. Specify the Read option by selecting Default ‘public’ or Custom.
12. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
13. Specify the Write option by selecting Default ‘private’ or Custom.
14. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
Go to step 22.
15. If you are configuring a 256-port director, select the Configure for <256-Port_Director_Name>
check box.
• If you selected Configure for <256-Port_Director_Name>, go to step 19.
• If you did not select Configure for <256-Port_Director_Name>, continue with step 16.
FIGURE 10 Address Properties Dialog Box (SNMP Tab - v3)
16. Enter a user name in the User Name field.
17. Enter a context name In the Context Name field.
18. Select the authorization protocol in the Auth Protocol field.
19. Enter the authorization password in the Auth Password field.
• If you selected Configure for <256-Port_Director_Name>, go to step 22.
• If you did not select Configure for <256-Port_Director_Name>, continue with step 20.
20. Select the privacy protocol in the Priv Protocol field.
21. Enter the privacy password in the Priv Password field.