Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

52 DCFM Professional User Manual
53-1001355-01
Monitoring discovered fabrics
2
Monitoring discovered fabrics
NOTE
Monitoring is not supported on Hosts.
To monitor a fabric and all associated devices, complete the following steps.
1. Select Discovery > Setup.
The Discover Setup dialog box displays.
2. Select the fabric you want to monitor from the Discovered Addresses table.
3. Click Monitor.
The monitor function fails if the fabric has user-defined Admin Domains created or if the fabric
is merged with another fabric already in the monitored state.
4. Click OK.
Stop monitoring of a discovered fabric
NOTE
Monitoring is not supported on Hosts.
When you stop monitoring of a fabric, you stop discovery of and data collection for the specified
fabric and all associated devices.
To stop monitoring a fabric and all associated devices, complete the following steps.
1. Select Discovery > Setup.
The Discover Setup dialog box displays.
2. Select the fabric you want to stop monitoring from the Discovered Addresses table.
3. Click Unmonitor.
4. Click OK.