Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

58 DCFM Professional User Manual
53-1001355-01
Management server and client
3
Management server and client
The Management application has two parts: the Server and the Client. The Server is installed on
one machine and stores SAN-related information; it does not have a user interface. To view SAN
information through a user interface, you must log in to the Server through a Client. If you are
running Professional Edition, the server and the client must be on the same machine.
In some cases, a network may utilize virtual private network (VPN) or firewall technology, which can
prohibit communication between Switches and the Servers or Clients. In other words, a Server or
Client can find a Switch, appear to log in, but is immediately logged out because the Switch cannot
reach the Server or Client. To resolve this issue, check to determine if the ports in the table below
need to be opened up in the firewall.
NOTE
Professional Edition does not support remote clients.
TABLE 14 Ports
Port Number Ports Description Communication Path Open in Firewall
20
1
FTP Port (Control) FTP Control port for internal
FTP server
Client–Server
Switch–Server
No
Yes
21
1, 2
FTP Port (Data) FTP Data port for internal
FTP server
Client–Server
Switch–Server
No
Yes
22
1
SSH or Secure Telnet Sectelnet port from server to
switch/client to switch
Server–Switch
Client–Switch
Yes
23
1
Telnet Telnet port from server/client to
switch
Server–Switch
Client–Switch
Yes
25 SMTP Server port SMTP Server port for E-mail
communication
Server–SMTP Server Yes
80 jboss.web.http.port Non-SSL HTTP/1.1 connector
port
Client–Server No
80
3, 4, 5
Switch http Switch non-SSL http port for
http and CAL communication
Server–Switch
Client–Switch
Yes
161
1
SNMP Port Default SNMP port Server–Switch Yes
162
3
snmp.trap.port Default SNMP trap port Switch–Server Yes
514
6
Syslog Port Default Syslog Port Switch–Server Yes
1527 Database port (Enforced during install) Port used by database Server–Database
Remote ODBC–
Database
No
24600 jboss.naming.jnp.port - port 0 Bootstrap JNP service port Client–Server No
24601 jboss.connector.ejb3.port - port 1 EJB3 connector port Client–Server No
24602 jboss.connector.bisocket.port - port 2 Bisocket connector port Client–Server No
24603 jboss.connector.bisocket.secondary.port
- port 3
Bisocket connector secondary
port
Client–Server No
2460
6
jboss.naming.rmi.port - port 4 RMI naming service port Client–Server No