HP Intelligent Infrastructure Analyzer Software Release Notes

Table 1 Hardware and Software requirements (continued)
Supported platforms, versions, or configurationHardware and software requirements
Operating System
• Windows Server 2003/2008 (x86, x64)
• Windows XP
• Windows Vista
• Windows 7
NOTE: These operating systems require their respective latest service packs.
For more information, see “Installing OS specific service packs” (page 5).
HP IIAS version 1.0 supports IPV4 only. The host where HP IIAS and the devices
(FC Switches) are installed, must have IPV4 addresses.
IP network addresses
Installing OS specific service packs
Table 2 IIAS Management Server
ArchitectureRevisionOS VersionOS
x86SP2Standard Edition or Enterprise EditionWindows Server 2003
x64
x86SP2Standard Edition or Enterprise EditionWindows Server 2003 R2
x64
x86SP2Standard Edition or Enterprise EditionWindows Server 2008
x64
x64No SPEnterprise EditionWindows Server 2008 R2
x86SP1Business or Enterprise EditionWindows Vista
x86SP3Professional EditionWindows XP
x64SP1Enterprise EditionWindows 7
X86
For more information on installing, configuring, and using HP Intelligent Infrastructure Analyzer
Software, see the HP Intelligent Infrastructure Analyzer Software User Guide. For release specific
information, see the HP Intelligent Infrastructure Analyzer Software Release Notes.
Thank you for choosing HP products.
If you have further queries or issues, send an e-mail to:
[e-mail] with the following subject line: HP Intelligent
Infrastructure Analyzer Software Query.
Limitations
• Only IPv4 addresses must be specified for the discovery of the SAN switch while creating or
editing the SAN profile. IPv6 addresses and network name are not supported.
• VCFC module will be discovered during switch discovery but it is not supported for data
collection.
Installing OS specific service packs 5