HP Insight Cluster Management Utility v7.1 User Guide

monitoring
Status of the monitoring daemon that gathers the information reported by the small monitoring
agent installed on the compute nodes.
web service
Status of the HP Insight CMU GUI to start from a web browser on a workstation.
nfs server
Status of the NFS server.
dhcpd.conf
Status of the DHCPD configuration.
NOTE: Because compute nodes are not installed on the cluster at this time, the monitoring agent
is not started after the installation. This behavior is normal. The cluster must be configured for
monitoring to start.
B.12 Configuring HP Insight CMU to start automatically
IMPORTANT: This installation depends on the operating system installed and might have to be
adapted to your specific installation.
NOTE: The /etc/init.d/cmu file is available as a result of the HP Insight CMU rpm installation.
1. Choose one of the following options:
• If your distribution supports chkconfig:
# chkconfig --add cmu
• If your distribution does not support chkconfig, add start and kill links in the rc.d
directory:
# ln -s /etc/init.d/cmu /etc/rc.d/rc5.d/S99cmu
# ln -s /etc/init.d/cmu /etc/rc.d/rc5.d/K01cmu
# ln -s /etc/init.d/cmu /etc/rc.d/rc3.d/S99cmu
# ln -s /etc/init.d/cmu /etc/rc.d/rc3.d/K01cmu
2. After system reboot, verify that the /var/log/cmuservice_hostname.log file does not
contain errors.
B.13 Verifying the HP Insight CMU state
The cmuserver utility reports the state of the daemons.
/etc/init.d/cmu status
cmu:java running (X.X.X.X:YYYY)
cmu:cmustatus running
cmu:monitoring not running (*)
cmu:web service running (port ZZ)
cmu:nfs server running
cmu:dhcpd.conf configured ( subnet 10.0.0.0 netmask 255.255.255.0 { } )
cmu:ha unconfigured
NOTE: If nodes are not installed on the cluster, then the monitoring agent is not started. This
behavior is normal. The cluster must be configured for monitoring to start.
B.14 Installing HP Insight CMU on the GUI client workstation
Many HP Insight CMU commands require the client workstation to display xterm windows from
the HP Insight CMU management server. On Windows operating systems desktops, X Window
emulators such as Reflection, Exceed, or Xming can be used.
IMPORTANT: The Java Runtime Environment version 1.6.0 or higher must be installed on the
GUI client workstation.
B.12 Configuring HP Insight CMU to start automatically 135