HP P6000 Cluster Extension Software Administrator Guide (5697-2274, November 2012)

Configuring management servers
To configure management servers from the cluster software Parameters tab or the resource
configuration tool:
1. To add a management server (CV Server):
a. Click Add to open the Add SMA Data center Assignment dialog box.
b. Select a management server from the Server Name list.
c. Assign the management server to a data center selected from the Data center list.
d. Click OK to save and close the dialog box.
2. To remove a management server, select it, and then click Remove.
3. To modify a management server, select it, and then click Modify.
4. Click Apply to finish your modifications and leave the window open, or click OK to save your
changes and close the Properties window.
Configuring P6000/EVA disk arrays
To configure P6000/EVA disk arrays from the cluster software Parameters tab or the resource
configuration tool:
1. To add a disk array:
a. Click Add to open the Add Array Data center Assignment window.
b. Select a disk array from the Array Name list.
c. Assign the disk array to a data center selected from the Data center list.
d. Click OK to save and close the window.
2. To remove a disk array, select the array, and then click Remove.
3. To modify a disk array, select the array, and then click Modify.
4. Click Apply to finish your modifications and leave the window open, or OK to save your
changes and close the Properties window.
28 Configuring P6000 Cluster Extension