HP P6000 Cluster Extension Software Administrator Guide (5697-2274, November 2012)
FASTFAILBACK is not available when the UseNonCurrentDataOkLinkUp property
is set to YES.
RESYNCWAIT
The online local cluster group must wait until the DR group status is no longer merging
or copying. P6000 Continuous Access initiates a resynchronization of the local vdisk
based on the remote disk. P6000 Cluster Extension monitors the copy process. If no
copy progress is made after a monitoring interval expires, the copy process is
considered failed and P6000 Cluster Extension returns a global error. If RESYNCWAIT
has been specified for the ApplicationStartup object, the ResyncWaitTimeout object
must be specified, in case P6000 Cluster Extension should wait for resynchronization
changes for more or less than 90 seconds, which is the default.
Files resource_name.forceflag
resource_name.online
If specified in a user configuration file, resource_name is the value of the
APPLICATION tag; otherwise, resource_name is the value of the P6000 Cluster
Extension resource name.
ClusterNotifyCheckTime
Format Integer
Description Specifies how often P6000 Cluster Extension will check for VM live migration state
changes.
Default
value
10 seconds
ClusterNotifyWaitTime
Format Integer
Description Specifies the amount of time that P6000 Cluster Extension will monitor for VM live
migration state changes.
Default
value
5 seconds
CSObjectPathA (Required)
Format String
Description Specifies the HPEVA_ConsistencySet object path for the DR group in data center A.
This object path is used in sending management commands directed at the P6000
Continuous Access DR group.
MSCS-specific behavior
This is a private property for the P6000 Cluster Extension resource type within MSCS.
P6000 Cluster Extension automatically runs the Connection Test and updates the
consistency set object paths as necessary when the OK or Apply buttons is selected
on the Parameters tab.
CLI-specific behavior
You must enter this object in the user configuration file (UCF.cfg) when you use
P6000 Cluster Extension's CLI. To obtain the value of this object, run the clxconf
utility (see “clxconf” (page 56)).
CSObjectPathB (Required)
Format String
APPLICATION objects 47