HP P6000 Cluster Extension Software Administrator Guide (5697-2274, November 2012)

Description Specifies the HPEVA_ConsistencySet object path for the DR group in data center B.
This object path is used in sending management commands directed at the P6000
Continuous Access DR group.
MSCS-specific behavior
This is a private property for the P6000 Cluster Extension resource type within MSCS.
P6000 Cluster Extension automatically runs the Connection Test and updates the
consistency set object paths as necessary when the OK or Apply button is selected
on the Parameters tab.
CLI-specific behavior
You must enter this object in the user configuration file (UCF.cfg) when you use
P6000 Cluster Extension's CLI. To obtain the value of this object, run the clxconf
utility (see “clxconf” (page 56)).
DataSyncTimeout
Format Integer
Description Specifies the timeout value for a DR group member synchronization when the source
and destination remote copy sets are not synchronized. The timeout value is used if
the ApplicationStartup object is set to RESYNCWAIT.
Default
value
170 seconds
DC_A_Hosts (Required)
Format List
Description This space-separated list defines the cluster nodes in data center A.
DC_B_Hosts (Required)
Format List
Description This space-separated list defines the cluster nodes in data center B.
DC_A_ManagementHosts (Required)
Format List
Description Space-separated list of management servers for data center A. P6000 Cluster
Extension attempts to establish a management path (HP SMI-S) connection with one
of the management servers on the hosts in the list. The first host in the list that
establishes a successful connection with P6000 Cluster Extension is used as the
management path for the failover operation. P6000 Cluster Extension attempts to
connect to the management hosts in the local data center first, before using
management hosts in the remote data center. The hosts listed for data center A are
associated with data center A and do not necessarily need to be physically located
in data center A. You can specify the hosts using either the system host name or the
IP address.
DC_B_ManagementHosts (Required)
Format List
Description Space-separated list of management servers for data center B. P6000 Cluster
Extension attempts to establish a management path (HP SMI-S) connection with one
of the management servers on the hosts in the list. The first host in the list that
establishes a successful connection with P6000 Cluster Extension is used as the
management path for the failover operation. P6000 Cluster Extension attempts to
48 User configuration file and P6000 Cluster Extension objects