HP Jetdirect Print Servers - Administrator Guide

ENWW Using the Embedded Web Server 119
Dynamic For dynamic encryption, you may select one of the following
options:
● Basic Encryption: Dynamic WEP encryption is supported.
● Robust Encryption: Dynamic Wi-Fi Protected Access (WPA)
and WEP encryption protocols are supported.
When configured for EAP/PSK authentication, the print server
uses Robust Encryption (WPA encryption protocols).
When configured for EAP/802.1x authentication (LEAP only), the
print server should be configured with Basic Encryption.
When configured for EAP/802.1x authentication (PEAP, TLS,
TTLS only), the print server may be configured with either Basic
Encryption or Robust Encryption depending on your network.
Dynamic encryption protocols are under the control of the
authentication server and also must be supported by the Access
Point.
TCP/IP settings To minimize reconnections to the print server for initial network
configuration, the 802.11b page allows you to configure the
following basic TCP/IP settings at the same time that you
configure your wireless connection settings:
● IP Configuration Method
● IP address
● Subnet Mask
● Default Gateway
For a description of these parameters, see TCP/IP
below.
Table 4.3 802.11B Configuration Parameters (7 of 7)
Item Description