HP Jetdirect Print Servers - Administrator Guide

ENWW Configuring for LPD Printing 166
2. If you have not previously installed the software:
■ Windows 2000—In the Local Area Connection Properties
window, click Install. In the Select Network Component Type
window, select Protocol and click Add to add the Internet
Protocol (TCP/IP).
Follow the instructions on the screen.
■ NT 4.0—Click the Add button for each tab and install the
TCP/IP Protocol and the Microsoft TCP/IP Printing
service.
Follow the instructions on the screen.
When prompted, type the full path to the Windows NT
distribution files (you may need your Windows NT
workstation or server CD-ROM).
3. Enter TCP/IP configuration values for the computer:
■ Windows 2000—On the General tab in the Local Area
Connection Properties window, select Internet Protocol
(TCP/IP) and click Properties.
■ NT 4.0—You may be automatically prompted for TCP/IP
configuration values. If not, select the Protocols tab in the
Networks window and select TCP/IP Protocol. Then click
Properties.
If you are configuring a Windows server, type the IP address,
default gateway address, and subnet mask in the appropriate
spaces.
If you are configuring a client, check with your Network
Administrator to learn whether you should enable automatic
TCP/IP configuration or whether you should type a static IP
address, default gateway address, and subnet mask in the
appropriate spaces.
4. Click OK to exit.
5. If prompted, exit Windows and restart your computer for the
changes to take effect.