HP Jetdirect Print Servers - Administrator Guide

ENWW Troubleshooting the HP Jetdirect Print Server 189
Resetting to Factory Defaults
Parameters on the HP Jetdirect print server (for example, the
IP address) can be reset to factory default values using the following
procedures:
CAUTION For HP Jetdirect wireless print servers, resetting to
factory default settings may cause the print server
to lose its wireless connection to your network.
Reconfiguration of wireless network settings and
reinstallation of the print server may be required.
A Jetdirect X.509 certificate, installed for SSL/TLS
secure Web services, will be saved over a cold reset
to factory default values. However, a Certificate
Authority (CA) certificate installed to validate a
network authentication server will not be saved.
● HP LaserJet Printer with Internal EIO Print Server
In most cases, the HP Jetdirect internal print server can be reset
to factory defaults when a cold-reset is performed on the printer.
For selected HP LaserJet printers, a cold-reset is performed by
power cycling the printer while pressing the Go button. For other
printers, refer to your printer manuals. Or, visit
http://www.hp.com/go/support
and search for document file
bpj02300.html.
Note Some printers provide a factory reset option for
the printer through the printer’s control panel.
However, this reset option for the printer may not
reset the HP Jetdirect print server. When you
attempt to reset to factory default values, print a
Jetdirect configuration page to confirm that
factory-reset values have been assigned.