HP Jetdirect Print Servers - Administrator Guide

ENWW HP Jetdirect 802.11b Wireless Print Servers 266
To Configure the Jetdirect Print Server for Your Network
To configure the Jetdirect print server’s wireless settings to match
your network, using one of the following methods:
■ Using the HP Jetdirect Wireless Setup Wizard (Windows)
■ HP WPS Assistant (Mac OS X 10.1.5 or later)
■ Using Your Web Browser (Windows and Mac OS)
Using the HP Jetdirect Wireless Setup Wizard (Windows).
To use the HP Jetdirect Wireless Setup wizard, your wireless
computer must be running one of the following operating systems:
Microsoft Windows 98, Me, NT 4.0, 2000, XP, Server 2003.
Note The HP Jetdirect Wireless Setup Wizard is
distributed on the HP Jetdirect CD-ROM, which is
included with standalone HP Jetdirect wireless
print servers, and may be downloaded from HP
online support at:
http://www.hp.com/support/net_printing
1. Run the wizard and follow the instructions on the screen.
After your wireless computer is configured to match the
factory-default settings on the print server, the wizard will
search for available printers. Communication with the print
server is established when the wizard can find and list your
printer.
2. Select your printer and continue.
Through a series of screens, the HP Jetdirect Wireless Setup
wizard will systematically prompt you for the following wireless
settings:
■ Communication Mode (or wireless network topology)
■ Channel (Ad Hoc Mode only)
■ Network Name (SSID)
■ Authentication method
■ Static or dynamic encryption selections for your network