HP Jetdirect Print Servers - Administrator Guide

ENWW HP Software Solutions Summary 27
2. To install the software and set up the print path to the printer,
follow the instructions provided with the software. Contact your
network administrator to get the IP address or URL of the
printer to complete the setup.
HP Software System Requirements
● Computer running Microsoft Windows NT 4.0 (Intel-based) or
Windows 2000
● IPP-enabled HP Jetdirect print server (firmware must be at
revision x.20.00 or later)
HP Software Supported Proxies
Web proxy with support for HTTP v1.1 or greater (may not be
needed if printing over an intranet).
Microsoft Supplied Software
Note Contact Microsoft for support of Windows IPP
software.
Windows 2000/XP Integrated Software
On Windows 2000/XP systems, an alternative to using the HP
supplied software is to use the IPP-client software integrated with
Windows 2000/XP. The IPP implementation on the HP Jetdirect
print server is compatible with Windows 2000/XP IPP-client
software.
To set up a print path to an HP Jetdirect-connected Internet printer
using the Windows 2000/XP IPP-client software, proceed as follows:
1. Open the Printers folder (click Start, select Settings, and
select Printers).
2. Run the Add Printer wizard (double-click Add Printer), then
click Next.
3. Select the option for a network printer and click Next.