HP Jetdirect Print Servers - Administrator Guide

ENWW HP Jetdirect 802.11b Wireless Print Servers 270
10. Verify that your printer can communicate on your network. See
To Verify the Wireless Network Connection
.
Be sure to reconfigure your wireless computer so that it can
regain access to your network. Be sure to restore your Web
browser’s use of proxies, if required.
To install the printer on your wireless computer, see Install the
Printer on Your Network Systems.
● Apple Macintosh You can use your Web browser on an Apple
Macintosh system (Mac OS 9, Mac OS X ) to configure the
Jetdirect wireless print server with a wireless connection to your
network. Follow these steps:
Note Be sure to read “Before You Begin...” before
proceeding.
Note To communicate with the Jetdirect print server
through a Web browser, your system will require
temporary TCP/IP networking settings (such as an
IP address). For information on TCP/IP networking,
see Appendix A
.
1. Inspect your HP Jetdirect configuration page (see page 263) and
verify that your computer’s wireless network settings match the
factory-default wireless settings on the HP Jetdirect print
server.
2. Select the hpsetup network in the Apple AirPort menu.
a. Verify that Apple AirPort is turned on.
b. To display the menu, select the Apple AirPort icon in the
control strip (Mac OS 9) or the menu bar (Mac OS X )
c. Select the hpsetup network listed under
Computer-to-Computer (Ad Hoc) networks.