HP Jetdirect Print Servers - Administrator Guide

ENWW HP Jetdirect 802.11b Wireless Print Servers 271
Note Recommendation: Before proceeding with the
next step, you should record your system’s current
TCP/IP settings to be safe. If your network uses
TCP/IP and you accidentally lose your settings, you
will need to restore your TCP/IP configuration after
you have set up the HP Jetdirect print server.
3. If necessary, change the computer’s IP address so that it is on
the same IP subnet as the HP Jetdirect print server. For
example, if the default IP address of the print server is
192.0.0.192, you could use 192.0.0.193 on the computer.
■ Mac OS 9:
a. In the Apple menu, select Control Panels and then
TCP/IP.
To record your current TCP/IP configuration, and to work
from a duplicate configuration, follow these steps:
● In the File menu, select Configurations and then
Duplicate. Note the name of the current configuration.
● Enter a name for a new duplicate configuration.
● Select Make Active.
b. Select to configure TCP/IP Manually, and enter an IP
address that matches the IP subnet of the print server. For
example, if the default IP address of the print server is
192.0.0.192, then you could configure your computer with
an IP address 192.0.0.193 and a subnet mask of
255.255.0.0.
c. Disable the use of Web proxy servers.
To create a new Web proxy configuration with proxies
disabled and to save your existing configuration, proceed
as follows:
● In the Apple menu, select Control Panels and then
Internet.
● In the File menu, select Duplicate Set and then
Duplicate. Note the name of the current configuration.
● Enter a new name for a new proxy configuration.