HP Jetdirect Print Servers - Administrator Guide

ENWW TCP/IP Configuration 67
8. Skip this step if you have assigned unlimited leases in the
previous step. Otherwise, select Scope and select Add
Reservations to set up your printers as reserved clients. For
each printer, perform the following steps in the Add Reserved
Clients window to set up a reservation for that printer:
a. Type the selected IP address.
b. Obtain the MAC address or hardware address from the
configuration page, and type this address in the Unique
Identifier box.
c. Type the client name (any name is acceptable).
d. Select Add to add the reserved client. To delete a
reservation, in the DHCP Manager window, select Scope
and select Active Leases. In the Active Leases window,
click on the reservation you want to delete and
select Delete.
9. Select Close to return to the DHCP Manager window.
10. Skip this step if you are not planning to use WINS (Windows
Internet Naming Service). Otherwise perform the following
steps when configuring your DHCP server:
a. From the DHCP Manager window, select DHCP Options
and select one of the following:
Scope — if you want Name Services only for the
selected scope.
Global — if you want Name Services for all scopes.
b. Add the server to the Active Options list. From the DHCP
Options window, select WINS/NBNS Servers (044) from
the Unused Options list. Select Add, then select OK.
A warning may appear requesting that you set the node
type. You do this in step 10d.
c. You must now provide the IP address of the WINS server
by doing the following:
● Select Value, then Edit Array.
● From the IP Address Array Editor, select Remove to
delete any undesired addresses previously set. Then
type in the IP address of the WINS server and select
Add.