HP Jetdirect Print Servers - Administrator Guide

ENWW TCP/IP Configuration 71
Note If you choose to re-enable a DHCP configuration,
the print server will acquire its configuration
information from a DHCP server. This means that
when you choose DHCP and complete your
configuration session (using Telnet, for example),
the TCP/IP protocol for the print server is
re-initialized and all current configuration
information is deleted. The print server then
attempts to acquire new configuration information
by sending DHCP requests on the network to a
DHCP server.
For DHCP configuration through Telnet, refer to “Using Telnet” in
this chapter.