HP PCL/PJL reference (PCL 5 Color) - Technical Reference Manual

Index-2 EN
transfer raster data 6-32
user-defined pattern 5-38
compression
adaptive 6-29
adaptive (operation hints) 6-31
byte counts 6-34
delta row 6-20, 6-24, 6-27
raster data 6-15, 6-23
run-length 6-21
TIFF 6-21
TIFF, raster data 6-20
compression method
adaptive 6-28
delta row 6-24
run-length encoding 6-21
setting 6-20
TIFF 6-21
unencoded 6-21
Configure Image Data (CID) command
2-5, B-6
examples B-25
long form B-17
short form B-15
continuation, user-defined pattern
descriptor 5-39
control bytes, adaptive compression 6-29
CR (color range) command 7-19
cross-hatch patterns selection 5-29
current pattern 5-2
Current Pattern command 5-32
cursor positioning
adaptive compression 6-31
raster graphic 6-34
D
data block, adaptive compression 6-28
data compression, raster data 6-15
data range scaling B-16
data, user-defined pattern 5-39
default palettes 3-15, C-16
delta row compression
adaptive compression 6-29, 6-31
raster graphics 6-20, 6-24
descriptor, user-defined pattern header
5-38
destination image 5-2
destination raster height command 6-37
destination raster width command 6-37
device CMY color space B-18
device RGB color space B-17
device-dependent color A-10
device-independent color A-10
direct color selection A-5
dither patterns 4-2, D-3
user-defined dithers D-6
dithers
download dither matrix command D-7
multiple dither matrices D-10
download dither matrix command D-7
download pattern command 5-38
driver configuration command 4-4, D-21
duplicate row, adaptive compression 6-29
E
empty row, adaptive compression 6-29
encoding
by pixel A-7
by plane A-6
end raster graphics command 6-35
enter HP-GL/2 mode 7-2
escape sequences (PCL)
?*b#M - Set Compression Method
6-20
?*b#Y - Raster Y Offset 6-19
?*c#Q - Pattern Control 5-44
?*c#W - User-Defined Pattern 5-38
?*l # R - Pixel Placement Command
5-27
?*l#O - Logical Operation 5-13
?*p#R - Set Pattern Reference Point
5-43
?*r#F - Raster Graphics Presentation
6-10
?*r#T - Raster Height 6-13
?*r#T - Raster Width 6-15
?*t#R - Raster Graphics Resolution
6-8
?*v#N - Source Transparency Mode
5-7
?*v#O - Pattern Transparency mode
5-8
?*v#T - Select Current Pattern
Command 5-32
F
Faster Y Offset command 6-19
fill rectangular area command 5-48
finish mode command 4-6
foreground color 5-2
foreground color command 3-17, C-18
format field, user-defined pattern
descriptor 5-38
G
gamma correction A-2, D-17
gamma correction command D-17
graphic patterns 5-29
graphics
raster 6-1
special effects 5-1