HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part I

EN Entity Status Responses 16-13
Unbound Scalable Fonts
For unbound fonts, since multiple symbol sets can be associated with
an unbound font, the “SYMBOLSETS=” keyword is added to list the
available symbol sets and the symbol set sequence is no longer
present in the “SELECT=” line. For example, the printer’s internal
unbound scalable Courier (medium, fixed spaced) font and CG Times
(bold italic, proportional spaced) fonts would be returned as shown
below.
PCL
INFO FONTS
SELECT=“<Esc>(s0p__h0s0b4099T”
SYMBOLSETS=“0D,0I,0N,0S,0U,1E,1F,1G,...
SELECT=“<Esc>(s1p__v1s3b4101T”
SYMBOLSETS=“0D,0I,0N,0S,0U,1E,1F,1G,...”
Soft Fonts
For soft fonts (bitmap, bound scalable or unbound scalable), the font
ID number is also included at the end (a font downloaded with an ID
of 27 would be presented as “ ...<Esc>(27X ” ). For example, a
downloaded bitmap Courier with a font ID of 39 and a downloaded,
unbound scalable, Dom Casual typeface with a font ID of 78 would
be returned as shown below.
PCL
INFO FONTS
SELECT=“<Esc>(8U<Esc>(s0p10.00h12.0v0s0b3T<Esc>(39X”
SELECT=“<Esc>(s1p__v1s0b4148T<Esc>(78X”
SYMBOLSETS=“0D,0I,0N,0S,0U,1E,1F,1G,...”
Location Type 1 (Currently Selected) Font
For a status location type 1 (currently selected) font, only a single
font, the printer’s currently selected font, is returned. The keywords
and data returned are described as follows.
z “LOCTYPE=” and “LOCUNIT=” are returned after the “SELECT=”
line for each font.
z “SELECT=” line changes for bound and unbound scalable fonts.
For all scalable fonts, the actual size (either height or pitch) is
listed in place of the underscores.
For unbound scalable fonts, the symbol set currently bound
to the font is listed.