HP PCL/PJL reference - Printer Job Language Technical Reference Addendum

ENWW Auto-continuable conditions (30xxx) 129
Auto-continuable conditions (30xxx)
This list describes the set of PJL error codes and the corresponding control-panel-display strings
for auto-continuable conditions. If no action is taken, the device automatically continues if auto-
continue is set to true (except for when it encounters 30035 and 30036 errors).
Table 25. Auto-continuable conditions
Status
code Display string or code meaning
30010* STATUS BUFFER OVERFLOW
30016 20 MEM OVERFLOW or 20 MEMORY OVERFLOW
DATA LOST or 20 INSUFFICIENT MEMORY,
PRESS GO KEY
30017 21 PRINT OVERRUN or 21 PRINT OVERRUN
DATA LOST or 21 PAGE TOO COMPLEX
30018 40 ERROR or 40.1 HP MIO 1 ERROR
or 40.2 HP MIO 2 ERROR or
40 SER IO ERROR
30027 22 I/O CONFIG ERROR or 22 SER IO ERROR
22 HP MIO 1 IO ERROR CHECK SETUP or 22 HP
MIO 2 IO ERROR CHECK SETUP or 22 PARALLEL
IO ERROR CHECK SETUP
30034 41.x ERROR or 41.3 PAPER ERROR
30035 68 ERROR CHECK CONFIGURATION or 68
NVRAM ERROR, SETTINGS NOT SAVED
30036 68 SERVICE or 68 NVRAM FULL CHECK
CONFIGURATION or 68 NVRAM ERROR,
SETTINGS NOT SAVED
30072 49 REMOVE PAGE
30076 PERSONALITY MEMORY OVERFLOW/ OUT OF
MEMORY
30094 41.1 GENERAL MISPRINT ERROR
30095 41.2 BEAM DETECT MALFUNCTION
30096 41.3 IMPROPER PAPER SIZE or
41.3 UNEXPECTED PAPER SIZE
30097 41.4 NO VIDEO SYNC
30098 41.5 NOISY VIDEO SYNC REQ SIGNAL
30099 INVALID INPUT SOURCE
30100 INVALID OUTPUT DESTINATION
30101 BINDING AGENT OUT OF SUPPLIES
* If you are creating software programs for the HP LaserJet 4 and 5 printer
families, see “Printer Status Readback” in the “HP LaserJet 4 and 5 Printer
Family Comments” section in Appendix A of the Printer Job Language
Technical Reference Manual.