HP PCL/PJL reference - Printer Job Language Technical Reference Addendum

ENWW Potential operator intervention conditions (35xxx) 133
Potential operator intervention conditions (35xxx)
This list describes the set of PJL error codes and the corresponding control-panel display strings
for conditions where operator intervention might be required. The message “online” appears and
the product continues to operate, possibly with reduced functionality. Data might be lost.
Table 27. Potential operator intervention conditions
Status
code Display string or code meaning
35028 EIO DISK NOT FUNCTIONAL
35029 W1 IMAGE ADAPT or IMAGE ASSIST or MEMORY
LOW, PAGE SIMPLIFIED
35030 WA JOB ALTERED
35031 W2 INVALID PERS or REQUESTED LANGUAGE
NOT AVAILABLE
35032 WL WARNINGS LOST
35037 W3 JOB ABORTED or CANCELING JOB or
INSUFFICIENT MEMORY, JOB CLEARED
35039 W9 JOB 600/LTR
35040 W0 JOB 600/A4
35041 W8 JOB 600/OFF
35042* W7 JOB 300/LGL
35043* W5 JOB 300/LTR
35044* W6 JOB 300/A4
35045* W4 JOB 300/OFF
35073 WM CHK MEM CNFIG or MEMORY SETTINGS
CHANGED
35074 WM MEM CNFIG N/A
35075 USER MAINTENANCE REQUESTED
35076 WM personality MEM FULL or XXXX MEMORY
FULL, STORED DATA LOST
35078 Entered powersave mode (00 POWERSAVE) or
POWERSAVE ON
35081 WM JOB 300
35082 WD DISK NOT INIT or Volume 0 NOT INIT (Volume 0
is indicated as DISK, FLASH, or RAMDISK, as
appropriate)
35083 Volume 0 FAILURE (Volume 0 is indicated as DISK,
FLASH, or RAMDISK, as appropriate)
35084 WM JOB 600/LGL
35085 WM JOB 600/A3
35086 WM JOB 600/11x17
35087* WM JOB 300/A3
* For some printers, the WM JOB 300 message (35081) might be used instead.