HP Color LaserJet 4550 printer family - Software Technical Reference

Windows 95, Windows 98 and Windows Millennium
HP Color LaserJet 4550 Software Technical Reference 105
Users of a shared network version of Windows can install only those software
components that the Network Administrator installed during the Network Administrator
installation.
Connecting to the printer
After installing the end-user software on a client workstation, you or the network
administrator must connect the printer drivers to the printer on the proper port before the
client can print to the printer. The procedures for connecting to a port vary depending on
which operating system is being used. Use the instructions below that apply to which
operating system is used.
1. Select the printer in the Printers folder, and then open Properties from the File
menu.
2. Select the correct port from the Details tab. If the port is not present, select the
Add Port button and browse for the correct path to the printer.
Installation options and user prompts for Windows 95, Windows 98, and Windows
Millennium
The following table assumes you are using the HP Color LaserJet Installation CD.
Installation Option
Description User Prompts
Typical
Installation
Installs the printing
system already
configured for the
average user. This
includes the PCL 6 driver,
PS driver, Readme files,
bidirectional
communication, Resource
Manager and the
uninstaller.
Select Port. Allows you to select
the type of port the printer is to
be connected to.
• Use an existing port
• Add a port
• Connect to a shared
network printer