HP Color LaserJet 4550 printer family - Software Technical Reference

Windows NT 4.0
HP Color LaserJet 4550 Software Technical Reference 118
1. Insert the CD-ROM for the appropriate language into the CD-ROM drive.
2. Click the Start button, and then select Run.
3. If AutoPlay is bypassed, select Run from the Start menu.
4. Type D:\SETUP.EXE and press ENTER (or click OK).
5. Click Install Printer.
6. When you are prompted to choose the method of installation, click
Customization Utilities.
7. Select the language and operating system versions for which the disk images are
to be created, and choose the drivers to be included in the disk images.
8. Click the Browse button to assign a path to the drive and directory where the
disk images are to be copied.
9. Click Next and follow the on-screen instructions to complete the disk copy.
NOTE: Use a file management tool such as Windows File Manager or XCOPY
to copy disk images. If using an application or utility other than Disk
Copy, browse the image directory on the CD-ROM to determine the
location of the disk images.
If a disk copy utility other than Disk Copy (in the installer) is used to
create disk images, the Online User Guide will not be included in the disk
images.
Installing the printer software for network clients
Before a client can print to the HP Color LaserJet 4550 printer, the printer software must
be installed on the client’s workstation.
The procedures for installing end-user software on client workstations are similar to the
installation procedures for network administrators. Install the end-user software on client
workstations by running SETUP.EXE from the root directory of the CD-ROM or from the
Disk 1 directory of the disk images.
To install end-user software, select Typical or Custom.
Windows Installation Options
Typical Custom