HP Color LaserJet 4550 printer family - Software Technical Reference

Network operating systems
HP Color LaserJet 4550 Software Technical Reference 149
3. Select the Location Profiles tab.
4. Select Default in the Location Profile area, then select Properties at the bottom of
the window.
5. You will now see a new window with a tab labeled Services. Below that is another
selection window labeled as Services, where you should see the words Login Service
highlighted.
6. Below the Services selection drop-down list, another drop-down should have Default
highlighted. Select Properties from that list.
7. The next window, select the Bindery tab.
8. Check the Active Authenticator box and select the lower Clear Current
Connections box.
9. Click the browse button on the right side of the server drop-down box and select the
server you want to connect to as default.
10. Select OK on all of the open windows.
11. Right click on the Novell logo located in the Systray, select NetWare Login and re-
login into the server.
Once you have logged in, check that your connection is now in Bindery mode.
Installing HP drivers using NDPS and ZenWorks
To install HP drivers using NDPS and ZenWorks, you must have Novell ZenWorks 2.0 (or later),
Novell Client for NT Version 4.71, NDPS Ver. 2.0, and the appropriate HP and drivers and
postscript printer description (PPD) files.
NOTE: This procedure requires Novell Client 4.71 for NT to loaded on
the workstation, and ZenWorks 2.0 with Service Pack 1 loaded
on the server. ZenWorks Service Pack 1 should be loaded only
on English language servers. Service Pack 1 is included in
ZenWorks 2.0 for all non-English versions.
The user must create PPD configuration files, but the driver
assigns mailbox and stacker bins to user groups.
To verify that ZenWorks Service Pack 1 has been installed on English-language servers, obtain a
DOS prompt and make Z: the active directory. The DOS command ZENVER will display the
version and service packs installed. If Service Pack 1 has not been installed, it is available for
download from the Novell website; the English language filename is: ZFD2SP1.EXE.
1. Load HP printer drivers into RMS of the NDPS Broker
Using NWAdmin32,
a. Open the Broker.
b. Click the Resource Management button.
c. Click the Add Resources button.
d. Select the Windows NT 4 Printer Drivers icon.
e. Select Add; this will open a window labeled Add Resources.
f. Select the Browse button and navigate to the location of the HP printer drivers to be
installed.
g. Select the correct driver INF file
h. Install the first driver; when the install window closes, select Add to install more
drivers.
i. When you have completed installing the desired HP printer drivers, select OK and
OK.
j. Browse to where the drivers are located.