HP Color LaserJet 4550 printer family - Software Technical Reference

Network operating systems
HP Color LaserJet 4550 Software Technical Reference 151
Remove printer objects from the Novell Server.
To remove printer objects, it is first necessary to delete from the Novell serverall old queues that
were associated with the printer.
NOTE: A Bindery Queue as seen on a Novell server is made up of two
Objects: the Printer Queue and the Printer Server Object.
Verify that no previous Queue has been made and associated to the printer.
NOTE: The print queue or the print server object can detach from the
printer device. This will cause a malfunction and none of the
print jobs will print.
Check existing print queue and print server objects
1. Find NWAdmin32. If ZenWorks has been installed on the server, browse to
NWAdmin32 by the following path: Network Neighborhood > Server (Spy-5xb) > Sys
> Public > win32 > Nwadmin.exe.
2. Open NWAdmin32.
NOTE: If the administrator is not logged in to the specific server where
the file is installed, authentication for that server might be
required.
3. Select all references to the printer; Bindery mode printers have two objects and NDS
mode printers have three objects.
Figure 44 shows NDS print queue objects.
Figure 44: NDS print queue objects (NWAdmin32)
Figure 45 shows bindery print queue objects.
Figure 45: Binder print queue objects (NWAdmin32)