HP Color LaserJet 4550 printer family - Software Technical Reference

Appendix A: Job Status and Alerts
HP Color LaserJet 4550 Software Technical Reference 171
MoreOftenLe
ssOne
275 When the refresh rate slider control is set to the
MoreOftenLessOne, print jobs will use the value for this
key to check the status of a print job. (Update job state
every 275 milliseconds = ~3/10 of second.)
MoreOften 275 When the refresh rate slider control is set to the
MoreOften, print jobs will use the value for this key to
check the status of a print job. (Update job state every
275 milliseconds = ~3/10 of second.)
All values above are default values
[EWSConnect]
This section controls the timeout value for attempting to connect to the Embedded Web
Server (EWS) within the printer. If the printer doesn’t respond within the timeout value
specified below, Job Status and Alerts will assume that the EWS is not present within the
printer.
Key Name
Values Meaning
EWSTimeout 4000 Timeout value for retrieving data from the EWS within
the printer. The time specified is in milliseconds. (4000
milliseconds = 4 seconds.)
[LostJobTimer]
This section controls the default amount of time Job Status and Alerts will continue to
track a print job without any change in the job state. When Job Status and Alerts starts
tracking a new print job, it sets up a timer for the value specified below. Whenever the
state of the print job changes, the timer is reset. If the state of print job does not change
within the time specified, Job Status and Alerts will give up trying to track the print job,
and set the job state as Unknown.
Key Name
Values Meaning
LostJobtimeout 300000 Timeout value for indicating that the state of the
job is unknown and Job Status and Alerts will no
longer try to track the job if the job state hasn’t
been updated within the time specified. Time
specified is in milliseconds. (300000 milliseconds
= 5 minutes [(300000/1000 milliseconds)/ 60
seconds].)