HP Color LaserJet 4550 printer family - Software Technical Reference

Readme files
HP Color LaserJet 4550 Software Technical Reference 193
When port name is more than 63 characters, port creation fails.
Description:
If a user chooses to change the port name and uses a new name
of more than 63 characters, the port creation will fail. A dialog box
appears with the following message "There was an error creating
the port. Please refer to the Read Me file about how to
create network Printer Ports. The printer will be set up to
the local printer port." The driver installation finishes,
and the printer is setup to print to LPTx.
Workaround:
Run the installer again and type in a name with fewer than
63 characters.
_________________________________________________________________
Issue:
IP Address set via "Suggest Settings" and printer creation fails.
Conditions required:
The computer is configured with TCP/IP only and a Dial Up Adapter,
the printer has an assigned IP address, and the user performs specific
device search by hardware address.
Description:
After the printer is discovered via the hardware address, on the
IP Settings screen, the user can choose the Suggest Settings
option (auto net). If user uses the Suggest Settings option, the
installation continues as though the installer is assigning an
autonet address to the printer. However, the installation will
fail and IP on printer will not be written.
Workaround:
Do not change the IP Address via the Suggest Settings option.
_________________________________________________________________
Issue:
No default queue name is suggested by Install Network Printer Wizard.
Description:
Each time the Install Network Printer Wizard is run on different
workstations a new queue is created. For the first eight installs,
Install Network Printer Wizard will suggest a default queue
name incrementing by _q2, _q3... This is successful until
the ninth queue. When the ninth queue should be created, the queue name
field is left blank instead.
Workaround: