HP Color LaserJet 4550 printer family - Software Technical Reference

Printing system software components
HP Color LaserJet 4550 Software Technical Reference 25
Figure 9: The default appearance of the Finishing tab (PCL 5c version)
Document Options
The Document Options group box dynamically sizes itself and positions its controls
according to the configuration of optional devices that affect its appearance. For the HP
Color LaserJet 4550 printer, the only device that affects the appearance of the Finishing
tab is the duplex unit. The group box with the duplex unit is shown below in Figure 10.
Figure 10: The Document Options group box (all PCLdrivers)
Print on Both Sides
The Print on Both Sides command for duplex printing is available only if a duplexer is
installed (indicated in the Configure tab). The default setting is off (not selected). Print on
Both Sides does not function when:
• Paper Type is set to Transparency, Cardstock, or Labels.
• Paper Size is not one of the following: Letter, Legal, A4, B5 (JIS), Executive and
Custom sizes greater than or equal to 127 mm by 190.5 mm (5.0 inches by 7.5
inches).