HP Color LaserJet 4550 printer family - Software Technical Reference

Printing system software components
HP Color LaserJet 4550 Software Technical Reference 46
• Rough
• Transparency
Paper Type commands
The PCL 5c escape sequence for paper type is Esc&n#W [operation][string], where
operation byte 100 and string ('d') as follows. The table below shows values of #.
Paper type
#
Bond 5
Cardstock 10
Color 6
Labels 7
Letterhead 11
Plain 6
Preprinted 11
Prepunched 11
Recycled 9
Rough 6
Transparency 13
Printer image
The bitmap image in the lower-right portion of the Paper tab screen represents the
current physical configuration of the printer and corresponds to its configuration data,
obtained either automatically through bidi, or from manual configuration. It should look
the same as the image that appears in the same location on the Destination tab and the
Configure tab.
On the Paper tab, the printer image contains hot spots where you can select a paper
source. When the mouse pointer moves over a hot spot, the arrow cursor reverts to the
gloved hand cursor used in the Bubble Help, the preview image, and other areas. The
current paper source, whether selected from the drop-down list or by selecting a hot spot,
is highlighted in bright green on the printer bitmap. The following points are worth noting:
• The Auto Select does not have a corresponding area to highlight on the bitmap.
• Selecting Manual Feed or Tray 1 highlights the same part of the bitmap.
• Selecting on the area that represents Tray 1 in the bitmap will always select Tray 1;
Manual Feed cannot be selected by selecting the bitmap.
• On the Paper tab, only input trays have hot spots and can be highlighted; output bins
must be selected from the Destination tab.