HP Color LaserJet 4550 printer family - Software Technical Reference

Printing system software components
HP Color LaserJet 4550 Software Technical Reference 51
Output bin options
Bin
The HP Color LaserJet 4550 printer has one output bin that can be selected in the driver,
so there is one item in the Bin list: Top Bin (Face-Down). There is also a rear face-up bin
that can be manually set for a straight paper path.
• Top Bin (Face-Down) refers to the main output bin at the top of the printer and is the
only setting for the HP Color LaserJet 4550 printer. Jobs sent to this bin are printed
face-down. This option is always available and there are no paper size/type
constraints.
Options
The Options drop-down list is inactive.
Printer image
The bitmap image in the lower-right portion of the Destination tab screen represents the
current physical configuration of the printer according to the driver’s configuration data
(obtained automatically through bidi, or manually configured through the driver). It should
have the same appearance as the image in the same location on the Paper tab and the
Configure tab.
On the Destination tab, the printer image contains hot spots for selecting an output bin,
but, since the HP Color LaserJet 4550 printer supports only one output bin in the driver,
there is no other selection possible. When the mouse pointer moves over a hot spot, the
arrow cursor reverts to the gloved hand cursor used in the Bubble Help, the preview
image, and other areas. The current output bin is highlighted in a bright green color on
the printer bitmap.
NOTE: On the Destination tab, only output bins have hot spots and can
be highlighted; source trays must be selected from the Paper
tab.