HP Color LaserJet 4550 printer family - Software Technical Reference

Printing system software components
HP Color LaserJet 4550 Software Technical Reference 60
Envelope feeder
There is no envelope feeder option for the HP Color LaserJet 4550 printer.
Mopier enabled
Multiple Original Printing (Mopying) increases printer performance and reduces network
traffic by sending the job to the printer once, then storing it on the hard disk. The rest of
the copies are printed at the printer's fastest speed.
When this Mopier Enabled is selected, the Collate at Printer PJL command SET QTY=
(for example, @PJL SET QTY=3 where 3 is the number of collated copies to generate) is
sent at the beginning of each print job. The Mopier Enabled option does not affect the
printer image.
Mopier Enabled is enabled only when the Configure Tab settings indicate (whether set
manually or via Auto Configure) that the printer has a hard disk and at least 64 MB of
RAM installed. When the Mopier Enabled checkbox is disabled, a Bubble Help icon
displays next to it, explaining that a printer hard disk and at least 64 MB of Total Printer
Memory is required to enable this feature.
NOTE: All models of the HP Color LaserJet 4550 Series Printer ship
with 64 MB or more memory installed.
Optional paper destinations
The Optional Paper Destinations drop-down list consists of "None," because no option
paper devices exist for the HP Color LaserJet 4550 printer. The Operation Mode control
cannot be enabled.
Operation mode
The Operation Mode drop-down list contains any supported modes for output devices.
Because the HP Color LaserJet 4550 printer supports no optional output devices, this
control is disabled.
Other options
The Other Options group box contains a single More... command button. Selecting the
More... button opens the dialog shown in Figure 37.
Figure 37: More Configuration Options dialog